Form, fill & seal machine
Packing Application
| Product | 2 types of Powder & Granulate |
| Quantity per bag | TBA |
| Contour of bag | 3 sides seal |
| Bag dimensions | TBA |
| Packing material | Any heat seal laminated film |
| Speed | 20 – 60 bags/min (refer to technical specification) |
| Dosage | Volumetric |
| Accuracy | ± 5 % |
The basic machine consist of the following
- User-friendly colors touch screen control panel
- Japanese Panasonic PLC for machine intercommunication
- Self-diagnostic system
- Simple troubleshooting solution
- Heavy duty inverter
- Bag counter
- Speed indicator
- Bag length indicator
- Easy bag length adjustment with length setting or photocell tracking
- Bag length compensation to overcome different film thickness
- Variable pull bag speed to cater for different type of film thickness
- 1 standard bag former is included
- Former vibrator
- 2 proximity switch for film tension control
- Japanese OMRON photocell for bag registration
- Japanese OMRON digital temperature controller for back seal and jaw seal
- German SIEMENS for main drive motor
- Italy design special made Varmex reducer
- Special surface hardening up to 52 degree on the driven cam
- All read switches are non-contact switch
- Highly precise online linear bearing
- Bi-active horizontal seal bar
- Heavy-duty waterproof heater
- All product-contacted areas are in stainless steel AISI304 construction
- 2 sets of holding funnel for 2 types of product
- 1 set of volumetric cup to collect product from holding funnel
- Optional for safety door requirement
| Film width | 45 mm – 200 mm (Minimum – Maximum) |
| Bag length | 50 mm – 200 mm (Minimum – Maximum) |
| Standard film thickness | 35 – 80 micron |
| Inner film reel diameter |
75 mm |
| Outer film reel diameter | 300 mm (Maximum) |
| Bag volume | 100 cc (Maximum) |
| Voltage | 1 phase / 220 V / 50 Hz |
| Total power | 2 kW |
| Machine speed | 100 bags / min (Maximum) |
| Actual speed |
subject to: |
